Maintenance Schedule - Toro 07205 Operator's Manual

Maintenance
Minimum Recommended Maintenance Intervals
Maintenance Procedure
Check battery fluid level/
cable connections
‡Change engine oil and filter
Lubricate all grease fittings
Inspect the condition and wear of the tires
Change engine oil and filter
Inspect cooling system hoses
Check cable adjustments
Check alternator and fan belts
Service the air filter
Check front axle boot joint (4-wheel drive)
Check engine RPM (idle and full throttle)
Torque the wheel lug nuts
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace electric fuel pump filter
Torque cylinder head and adjust valves
Replace the transaxle filter
Change the transaxle oil
Clean the transaxle strainer
Change the front differential oil (4-wheel drive)
Pack the front wheel bearings (2-wheel drive)
‡ Initial break in at 10 hours
Initial break in at 50 hours
Replace all interlock switches
Flush the cooling the cooling system and replace fluid
Drain and flush the fuel tank
Change the brake fluid
30

Maintenance Schedule

Every 50
hours
Maintenance Interval& Service
Every Every
Every
200
100
hours hours
Annual Recommendations
Items are recommended every 1200 hours
or 2 years, whichever occurs first.
Every
800
400
hours
hours