Side-Discharging The Clippings - Toro Super Recycler 20382 Operator's Manual

Removing the Grass Bag
1. Route the starter rope around the lower- rope guide
(Figure 24).
G017483
Figure 24
1. Lower-rope guide
Note: The lower-rope guide releases the starter rope
when you pull the recoil-start handle.
2. Raise and hold up the discharge deflector.
3. Remove the grass bag.
4. Install the rear-discharge plug
Figure 25
1. Discharge deflector
Important: Ensure that the rear-discharge plug is
locked in place. To lock the plug, firmly push the
plug in until it snaps into place behind the tabs,
and rotate the lever on the plug to the left
26).
(Figure 25).
G017463
2. Rear-discharge plug
(Figure
1. Lever
Note: To unlock the plug, rotate the lever on the plug
to the right (Figure
5. Lower the discharge deflector.
Side-Discharging the
Clippings
Use the side-discharge feature for cutting very tall grass.
If the bag is on the machine, remove it and insert the
rear-discharge plug; refer to
13) before side-discharging the clippings.
Important: Ensure that the rear-discharge plug is
locked in place. To lock the plug: Raise the discharge
deflector (Figure 27), firmly push the plug in until it
snaps into place behind the tabs, and rotate the lever on
the plug to the left (Figure
13
Figure 26
2. Tabs
26).
Removing the Grass Bag (page
26).