Product Overview; Controls; Operation; Checking The Engine Oil Level - Toro 22190 Operator's Manual

Product Overview

1. Handle
2. Throttle control lever
3. Grass bag
4. Fuel tank
5. Oil filter (not shown)
6. Air filter

Controls

1. Control bar
2. Throttle control lever
Figure 7
7. Cutting height lever (4)
8. Spark plug
9. Discharge tunnel
10. Oil fill/dipstick
11. Starter handle
12. Control bar
Figure 8
3. Recoil starter handle

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.
Each time before you mow, make sure that the
self-propel drive and the control bar operate properly.
When you release the control bar, the blade, the engine,
and the self-propel drive should stop. If they do not,
contact an Authorized Service Dealer.
CAUTION
This machine produces sound levels in excess of
85dBA at the operator's ear and can cause hearing
loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
1. Warning—wear hearing protection.

Checking the Engine Oil Level

Service Interval: Before each use or daily
Initially, fill the crankcase with 29 ounces (0.85 liters)
of oil. Use only high-quality SAE 30 or SAE 10W30
weight detergent oil that has the American Petroleum
Institute (API) service classification SF, SG, SH, or SJ.
With oil filter
Without oil filter
Before each use, ensure that the oil level is between the
Add and Full marks on the dipstick (Figure 10).
10
Figure 9
Oil Capacity
29 ounces (0.85 liters)
22 ounces (0.65 liters)