Filling The Crankcase With Oil - Toro 22190 Operator's Manual

1. Discharge door handle
2. Since the plug is slightly wider than the discharge
tunnel opening, rotate the plug clockwise slightly
while inserting it (Figure 5).
Note: Ensure that the arrow on the plug decal
points upward.
3. Push the plug all the way in until the spring clip on
the bottom of the plug clicks into place, locking the
plug securely into the discharge tunnel (Figure 6).
1. Spring clip
4. Release the discharge door handle to lock the top
of the plug.
Figure 5
2. Plug, rotated clockwise
Figure 6
4

Filling the Crankcase with Oil

No Parts Required
Procedure
The engine crankcase is shipped without oil. You
must fill it with approximately 22 ounces (0.65 l) of oil
before starting the engine. Refer to Checking the Engine
Oil Level in Operation (page 10), for oil specifications
and instructions.
9