Additional Information
For more information on removing and replacing hardware components, the Computer Setup utility,
and troubleshooting, refer to the Maintenance and Service Guide (available in English only) for your
computer model at http://www.hp.com.
Connecting Power
1.
Plug the power cord into the power connection on the rear of the computer (1).
2.
Plug the three-pronged power plug into the power brick (2) and a power outlet (3).
Figure 2-1
3.
Plug all peripheral cables into the appropriate ports as needed.
4.
Press the power button on the front of the computer to turn it on.
Locating Internal Components
The following sections contain procedures for removing and replacing these internal components:
Memory
●
Battery
●
Connecting Power
Additional Information
7