Indicator Light - BOMBARDIER outlander max series Operator's Manual

Pull the position lamp socket out of headlamp
housing.
1
V01G1XY
1. Position lamp socket
2. Headlamp housing
Push bulb in and hold while turning counter-
clockwise to release.
Install the new bulb by first pushing in while
turning clockwise.
Put back the position lamp socket in the head-
lamp housing and connect the connectors.
Brake Lamp and Rear Position
Lamp
Unscrew lens screws to expose bulbs.
2
V07G27Y
1. Lens
2. Screws
132
2
1 2
V07G28Y
TYPICAL
1. Brake lamp bulb
Push the bulb in and hold while turning coun-
terclockwise to release.
Install the new bulb by first pushing in while
turning clockwise.
Reinstall all removed parts.
Direction Indicator
Remove the screw retaining the lens to the
housing. To do this, pull the housing to reach
an access to the screw.
Push and turn the bulb counterclockwise. Pull
the bulb to remove it.
Install the new bulb by first pushing in while
turning clockwise.
Reinstall the lens.

Indicator Light

If one LED is burnt in the cluster, see an au-
thorized Bombardier ATV dealer for the clus-
ter replacement.
Speedometer
The speedometer is lighted with LEDs. If one
LED burnt, replace the speedometer. The
LEDs are not available separately.
1