Surface To Avoid Scratching The Console Base - NordicTrack C 220i User Manual

6. Identify the Right Handrail (84).
Attach the Right Handrail (84) to the Right
Upright (90) with two 5/16" x 3" Screws (28) and
two 5/16" Star Washers (11); start both Screws,
and then tighten them. Make sure not to
pinch the Upright Wire (81).
Attach the Left Handrail (not shown) to the
Left Upright (not shown) in the same way.
Note: There are no wires on the left side.
7. Set the Console Base (64) face down on a soft

surface to avoid scratching the Console Base.

Remove and discard the two indicated screws
(B). Then, remove the Pulse Crossbar (93).
6
84
7
B
93
10
28
11
81
90
64
B