Table of Contents
Advertisement
Sending a fax
1
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 65).
2
Press Fax from the display screen.
Adjust the document settings in the Advanced or Image tab (see
3
"Adjusting the document settings" on page 163).
4
Press the Basic tab.
Select Resolution.
5
When the cursor is blinking in the input line:
6
•
For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button using the numeric keypad on the control
panel.
•
For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button using the
numeric keypad on the control panel.
Press
(Start) on the control panel.
7
The machine starts to scan and send a fax to the destination.
156
8. Faxing
Advertisement
Chapters
Table of Contents
