Using The Wireless Surround Speaker (Xv-Htd630 Only) - Pioneer XV-HTD530 Operating Instructions Manual

04 Getting started
Using the wireless surround
speaker (XV-HTD630 only)
The wireless speaker supplied with your
system can be used for multichannel sound
with your main setup, or as a second stereo
speaker system in another room.
WIRELESS
WIRELESS
1 Press
The current setting is shown in the display.
2 Use
'W.Surr.', 'W.Stereo', or 'W.Off'.
• W.Surr. – Sounds going to the surround
left and right channels are heard through
the wireless speakers.
• W.Stereo – Any source playing through
the main system is heard in stereo
through the wireless speakers
(multichannel sources will be downmixed
to stereo).
• W.Off – The wireless speakers are muted.
44
En
ENTER
.
(cursor up/down) to select
• Make sure to stop/turn off the source and
switch off the wireless speaker when
switching speaker systems. The wireless
speaker will output the source at very loud
volumes if the wireless speaker is set to
SURROUND and the main unit is set to
In this case, the volume control
W.Stereo.
has no effect, so please follow these
precautions.
ENTER
3 Press .
4 Set the WIRELESS MODE switch on the
wireless speaker to the same mode you
selected above.
• If you selected W.Off in step 2, the
WIRELESS MODE switch has no effect.
• When you select W.Surr. (SURROUND
on the wireless speaker), you won't be
able to hear anything through the
speakers connected to the surround left
and right speaker terminals of the XV-
HTD630. The signals are sent to the
wireless speakers instead.
• When you select W.Stereo (STEREO on
the wireless speaker), any active
Advanced Surround or Surround mode is
canceled.
• Even when not in use, the fan in the
wireless speaker will continue to operate.
Switching off the wireless speaker when
not in use will increase product life.