Wall-Mounting The Front And Surround Speaker System - Pioneer S-DV131 Operating Instructions Manual

Additional information
Wall-mounting the front and
surround speaker system
Attaching the brackets
• Make sure to tighten the supplied screw as
securely as possible when attaching the
bracket to the back of the speaker.
• Please do not attach the brackets to the
center speaker.
• Please do not attach the brackets to the tall
front speakers supplied with the following
speaker systems: S-DV232T.
Bracket screw (supplied)
Before mounting
• Remember that the speaker system is
• Mounting screws are not supplied. Use
• If you are unsure of the qualities and
• Pioneer is not responsible for any
Mounting screw (not supplied)
5 – 7 mm
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall on
which you intend to mount the speakers is
strong enough to support them. Do not
mount on plywood or soft surface walls.
screws that are suitable for the wall
material and that will support the weight of
the speaker.
Note
strength of the walls, consult a
professional for advice.
accidents or damage that result from
improper installation.
08
5 mm
10 mm
43
En