Memorizing Stations; Listening To Station Presets; Listening To Other Sources - Pioneer XV-HTD530 Operating Instructions Manual

Getting started

Memorizing stations

You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the (cursor left/right)
buttons to choose 'St. Memory?' then
press ENTER.
4 Use the (cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5 Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you'll
have to save them again.

Listening to station presets

1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a
station preset.
• If you are using the front panel controls,
press TUNER FM/AM/ST. until you're in
station preset mode, then use the
and buttons to select a station
preset.

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Listening to TV audio through this system on
page 21 and Connecting auxiliary components
on page 90.
STANDBY/ON
1 If the system isn't already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
• If you're using the remote control, press
TV to select the TV input, or use the LINE
(L1/L2) button to select the LINE 1 or LINE
2 input.
• Using the front panel controls, the TV/L1/
L2 button switches between the three
inputs.
3 If necessary, start playback of the
external source.
L1/L2
TV LINE
04
43
En