Pioneer XV-HTD530 Operating Instructions Manual page 26

03 Controls and displays
6 PGM (page 56)
Lights when a program list has been
programmed.
7 RPT and RPT-1 (page 54)
RPT lights during repeat play. RPT-1 lights
during repeat one-track play.
8 RDM (page 55)
Lights during random play.
9 V.PART
Lights when playing a video part of a DVD
disc.
10 ATT (page 90)
Lights when the input attenuator is active for
the currently selected analog input.
11 REC MODE (page 91)
Lights when Rec Mode is on.
12 Timer indicators (page 68)
Lights when the timer is set
Lights when the sleep timer is active
13 2 PRO LOGIC II (page 45)
Lights during Dolby Pro Logic decoding.
14 2 DIGITAL (page 45)
Lights during playback of a Dolby Digital
source.
15 Speaker indicators
These show which speakers are being used to
output the current source. The illustrations
below show some example displays.
5.1 channel surround sound
Stereo (2.1 channel) sound
3.1 channel sound with Dialogue
enhancement on the center
26
channel
En
5.1 channel surround sound with
Virtual Surround Back mode active
(When headphones are connected, none of
the speaker indicators are lit.)
16 PRGSVE (page 77)
Lights when progressive scan video output is
selected.
17 ADV.SURR. (page 47)
Lights when one of the Advanced Surround
listening modes is selected.
18 DTS (page 45)
Lights during playback of a DTS source.
19 kHz / MHz
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM)
20 Character display
21 (page 62)
Lights during multi-angle scenes on a DVD
disc.
22 WIRELESS (XV-HTD630 only)
Lights when either the W.Surr. or W.Stereo
mode is selected (see Using the wireless
surround speaker (XV-HTD630 only) on
page 44).