Table of Contents
Advertisement
12
Additional information
Problem
Audio cannot be
received.
Horizontal stripe noise
interference on a TV set
near the transmitter.
Error Messages
Message
Child Lock
Rec Mode On
Phones In
DVD-AUDIO
SACD
96K Stereo
No Surr. SP
Muting
Exit
96
En
Remedy
•The radio wave reception is variable depending on locations due to
the effects of obstacles and reflecting objects. Try changing the
location of the receiver a little.
•The transmitter and receiver are designed and sold as a pair, and
they identify each other in communication. This means that
communication is not available between separately purchased
transmitter and receiver.
•Is there a piece of A/V equipment with an antenna near the
transmitter? If so, move the transmitter away from the antenna input
terminal of the AV equipment.
Description
• This message appears when the front panel buttons are pressed
when the child lock feature is active. See Child Lock on page 85 for
more on switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the Recording Mode is on (see Recording mode on page 91).
• Blinks rapidly for 2 seconds when an operation is prohibited
because headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is DVD-Audio.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is a Super Audio CD.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited
because there is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited
because the sound is muted (see Muting the sound on page 49).
• Appears briefly when a menu is automatically exited after a set
period of inactivity.
Hide quick links:
Advertisement
Table of Contents
