Edit; Execute (Exec); Comment (Cmnt); Copy - Garmin CNX 80 Pilot's Manual

Basic Operation
Flight Planning
Select an Origin Waypoint for Flight Plan
Removing a discontinuity from a Flight Plan
58

Edit

Pressing the Edit menu item key, while highlighting the Active flight plan, creates a copy of the active flight
plan, which is called the "Modified" flight plan. Making a copy protects you from accidently changing your ac-
tive flight plan. You can now edit the "Modified" flight plan. If you are already viewing a "Modified" flight plan,
you will be prompted to replace the current modified flight plan (Menu/Enter) or keep the current one (CLR).
1. Turn the Large knob to move to the leg to modify (highlighted in green).
2. Press Modify to change the selected leg or procedure. Use the Large and Small knobs to select a new
waypoint and press Menu/Enter.
3. Press the →Wpt key to insert another Waypoint or press the Arwy key to insert an Airway.
4. After modifying the flight plan, the smart keys give you the choice of Back, Executing, or Expanding and
viewing details in the new Flight Plan

Execute (Exec)

Use the Execute command to make the highlighted flight plan the Active flight plan. A flight plan that is being
modified will not be used until you press Exec and confirm the activation.

Comment (Cmnt)

This function allows you to place a comment, of up to one line of text, for the flight plan. The comment will be
placed just below the flight plan name.

Copy

The Copy function creates a duplicate of the selected flight plan. You can use the Copy function as a timesav-
ing method to create a new flight plan when you will reuse many of the same waypoints and procedures.