Garmin CNX 80 Pilot's Manual page 134

Basic Operation
Messages
126
Message
WARNING Loss of Integrity Cross-Check NAV
Integrity Restored Normal Ops
WARNING Loss of Navigation - Insufficient Sats
WARNING Loss of Navigation - Position Error
WARNING Loss of Navigation - Loss of GPS Com
Config Failure: Unit needs servicing
Config Corrupt: Use Ground Maint Mode to correct
Config Error: Verify User Settings
CDI Selection Should be set To (Localizer, ILS, or VOR)
Standby VOR Frequency Set To xxx.xx For Approach
ENTER: Flip to Active
Database Invalid: Database needs updating
Database Invalid: Software needs updating
Database Not Current Starts: (date) Ends (date)
Altimeter correction failed switching to alternate cor-
rection mode
Flight Plan Mismatch with Database Invalid Waypoints
Found
Description
GPS position integrity lost. Verify by cross-checking
with VHF Nav.
Pilot awareness.
GPS position lost. Use other Nav equipment.
GPS position lost. Use other Nav equipment.
GPS position lost. Use other Nav equipment.
Do not use for IFR ops or primary navigation. Contact
dealer or Customer Service.
Checked on power-up. System configuration invalid.
See dealer or call Customer Service.
Go to System Configuration page and check user set-
tings.
Pilot awareness.
Pilot awareness.
Database unavailable until updated.
Database unavailable until unit software is updated.
Database should be updated.
Altimeter corrections failed. Unit will prompt for other
inputs.
Flight plan waypoints are no longer in the Nav data-
base.