Enable Sbas Providers - Garmin CNX 80 Pilot's Manual

Basic Operation
System
Entering Owner Information
118

Enable SBAS Providers

Normally the best selection of satellites for SBAS coverage is automatically selected. You may manually enable
or disable specific SBAS providers. Normally all SBAS providers should be enabled, but there may be some
situations where it may be useful to disable an SBAS provider or when required by local regulatory agencies.
1. Press the CRSR knob to start editing.
2. Turn the Large knob to highlight the Enable WAAS selection (WAAS, EGNOS, MSAS, etc.).
3. Turn the Small knob to change the value.
4. Press the Menu/Enter key to save the value.