MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking rear brake fluid level
9.39
Warning
Danger of accidents Brake system failure.
–
MINIf the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings.
Have the brake system checked in an authorized KTM workshop, and do not ride any further.
–
Remove screw connection
–
To adjust the basic position of the foot brake pedal as needed, loosen nut
screw
accordingly.
Info
The range of adjustment is limited. The screw must be screwed into the footrest
bracket by at least four turns.
–
Position foot brake cylinder
Hold screws
Guideline
Nut, foot brake cylinder screw
–
Check the free play of the foot brake lever. (
–
Tighten nut
600639-10
on foot brake cylinder
so that the foot brake pedal has the necessary free travel.
in place and tighten the nuts.
.
.
M6
10 Nm (7.4 lbf ft)
S. 93)
94
and turn