MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing rear wheel
x
9.45
–
Operate the hand brake lever several times until the brake pads are lying correctly on
the brake disc.
–
Take the front from the work stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
–
Fully tighten screw
Guideline
Screw, fork stub
600490-11
–
Taking rear from work stand. (
–
Jack up the rear of the motorcycle. (
–
Press the brake caliper by hand on to the brake disc in order to press back the brake
piston.
–
Remove nut
–
Holding the rear wheel, withdraw the wheel spindle
100267-10
S. 63)
.
S. 64)
S. 64)
. Remove chain adjuster
M8
15 Nm (11.1 lbf ft)
.
.
103