Putting Into Operation After Storage - KTM 690 SMC Owner's Manual

STORAGE
–
Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.

Putting into operation after storage

14.2
–
Take the front from the work stand. (
–
Taking rear from work stand. (
–
Recharge the battery.
x
–
Install the battery. x (
–
Set the clock. ( S. 35)
–
Fill up with fuel. ( S. 57)
–
Carry out checks before putting into operation. (
–
Make a test ride.
S. 63)
S. 64)
( S. 112)
S. 112)
S. 48)
158