Troubleshooting - KTM 690 SMC Owner's Manual

TROUBLESHOOTING

TROUBLESHOOTING 10
Faults
Engine does not turn when the electric
starter button is pressed
Engine turns only if the clutch lever is
drawn
Engine turns although a gear is engaged
Engine turns but does not start.
Engine has too little power.
Possible cause
Operating error
Battery discharged
Fuse 1, 2, 3, or 4 blown
Main fuse burned out
Ignition/steering lock or emergency OFF
switch defective
Defect in safety start system
The vehicle is in gear
The vehicle is in gear and the side stand is
folded out
Defect in safety start system
Defect in safety start system
Operating error
Fuse 4 blown
Coupling of fuel hose connection not con-
nected
Socket connector of cable harness oxidized
Defect in fuel injection system
Air filter very dirty
Action
–
Carry out the instructions for starting.
( S. 49)
–
Recharge the battery. x
–
Check the cause of discharging.
–
Change the fuses of individual power
consumers. ( S. 116)
–
Change the main fuse. (
–
Have ignition/steering lock or emergency
OFF switch checked.
–
Have the safety start system checked.
–
Shift gear to neutral.
–
Shift gear to neutral.
–
Have the safety start system checked.
–
Have the safety start system checked.
–
Carry out the instructions for starting.
( S. 49)
–
Change the fuses of individual power
consumers. ( S. 116)
–
Reconnect coupling of fuel hose connec-
tion.
–
Clean socket connector and treat it with
contact spray.
–
Read the error memory with the KTM
diagnostics tool and correct the fault.
–
Have the air filter changed.
148
( S. 112)
S. 114)