Table of Contents
Advertisement
Display Name
Acquisition Status
Selector
Acquisition Trigger Wait
Acquisition Active
Acquisition Transfer
Frame Trigger Wait
Frame Active
Frame Transfer
Exposure Active
Acquisition Status
Acquisition Mode
Single Frame
Multi-Frame
Continuous
Acquisition Frame Count
Acquisition Arm Cmd
Acquisition Start Cmd
Acquisition Stop Cmd
Acquisition Abort Cmd
Transfer Control
Basic
User Controlled
Transfer Mode
Continuous
74 Operational Reference
Feature & Values
AcquisitionStatusSelector
AcquisitionTriggerWait
AcquisitionActive
AcquisitionTransfer
FrameTriggerWait
FrameActive
FrameTransfer
ExposureActive
AcquisitionStatus
AcquisitionMode
SingleFrame
MultiFrame
Continuous
AcquisitionFrameCount
AcquisitionArm
AcquisitionStart
AcquisitionStop
AcquisitionAbort
TransferControlMode
Basic
UserControlled
TransferOperationMode
Continuous
Description
Selects the internal acquisition signal to read using
AcquisitionStatus.
Device is currently waiting for a trigger to capture
one or more frames.
Device is currently doing an acquisition of one or
more frames.
Device is currently transferring an acquisition of one
or more frames.
Device is currently waiting for a frame trigger.
Device is currently capturing a frame.
Device is currently transferring a frame.
Device is exposing a frame.
Reads the state of the internal acquisition signal
selected using the AcquisitionStatusSelector feature.
Set the acquisition mode of the device. It defines
the number of frames to capture during an
acquisition and the way the acquisition stops.
One frame is captured for each AcquisitionStart
Command. An AcquisitionStop occurs at the end of
the Active Frame.
A sequence of frames is captured for each
AcquisitionStart Command. The number of frames is
specified by AcquisitionFrameCount feature. An
AcquisitionStop occurs at the end of the Active
Frame(s)
Frames are captured continuously with
AcquisitionStart until stopped with the
AcquisitionStop command.
Number of frames to be acquired in MultiFrame
acquisition mode.
Arms the device before an AcquisitionStart
command. This optional command validates all the
current features for consistency and prepares the
device for a fast start of the acquisition. If not used
explicitly, this command is automatically executed
at the first AcquisitionStart but will not be repeated
for subsequent ones unless a data transfer related
feature is changed in the device. (WO)
Start image capture using the currently selected
acquisition mode. The number of frames captured is
specified by AcquisitionMode feature. (WO)
Stops the Acquisition of the device at the end of the
current frame unless the triggerFrameCount feature
is greater then 1. (WO)
Aborts the acquisition immediately. This will end the
capture without completing the current Frame or
aborts waiting on a trigger. If no acquisition is in
progress, the command is ignored. (WO)
Sets the method used to control the transfer.
Basic mode ensures maximum compatibility but
does not allow for control of the transfer flow.
Manual mode allows maximum control of the
transfer flow.
Sets the operation mode of the transfer.
Blocks are transferred continuously until stopped
with the TransferStop command.
Device Version
& View
1.00
Expert
1.00
Expert
1.00
Beginner
1.00
Beginner
1.00
Guru
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Expert
1.00
Expert
Linea GigE Series Camera
Advertisement
Table of Contents
