Teledyne Linea GigE 2K User Manual page 71

Display Name
Pixel Format
Monochrome 8-Bit
Monochrome 12-Bit
Monochrome 12-Bit
Packed
Pixel Coding
Mono
MonoSigned
MonoPacked
Pixel Size
8 Bits/Pixel
12 Bits/Pixel
Pixel Color Filter
None
Horizontal Offset
Width
Height
multiple ROI Mode
Off
Active
ROI Count Horizontal
ROI Selector
ROI (x1, y1)
ROI (x2, y1)
ROI (x3, y1)
ROI (x4, y1)
ROI Offset X
ROI Width
Binning Selector
In Sensor
Linea GigE Series Camera
Feature & Values
PixelFormat
Mono12Packed
PixelCoding
PixelSize
PixelColorFilter
OffsetX
Width
Height
multipleROIMode
multipleROICountHorizontal
multipleROISelector
multipleROIOffsetX
multipleROIWidth
binningSelector
Description
Contains all format information as provided
by PixelCoding, PixelSize, PixelColorFilter,
combined in one single value. Decimation
must be Off.
Mono8 Mono8: Monochrome 8-Bit
Mono12 Mono12: Monochrome 12-Bit
Mono12: Monochrome 12-Bit Packed
Output image pixel coding format of the
sensor.
Mono Pixel is monochrome
MonoSigned Pixel is monochrome and signed
MonoPacked Pixel is monochrome and packed
Total size in bits of an image pixel.
Bpp8 Bpp8: 8 bits per pixel
Bpp12 Bpp12: 12 bits per pixel
Indicates the type of color filter applied to the
image.
None No filter applied on the sensor.
Horizontal offset from the Sensor Origin to
the Area Of Interest (in pixels).
Width of the Image provided by the device (in
pixels).
Height of the Image provided by the device
(in lines).
Enable the Multiple ROI (Region of Interest)
per image feature. The ROI Count is set by
the Multiple ROI Count feature.
Off Single ROI per image.
Active The ROI per image feature is active.
Specifies the number of ROI (Region of
Interest) available for the X axis.
Select an ROI (Region of Interest) when
Multiple ROI Mode is enabled. Selector range
is from 1 to the Multiple ROI Count value.
roi1_1 ROI (x1, y1)
roi2_1 ROI (x2, y1)
roi3_1 ROI (x3, y1)
roi4_1 ROI (x4, y1)
Horizontal offset (in pixels) from the origin to
the selected ROI (Region of Interest).
Width of the selected ROI (Region of Interest)
provided by the device (in pixels). Increment
value is device dependent.
Select how the Horizontal and Vertical Binning
is done. The Binning function can occur in the
Digital domain of a device or at the actual
sensor.
InSensor The Binning function can be done inside the
Sensor itself, which often allows binning to
increase the data rate from the sensor.
Device
Version &
View
1.00
Beginner
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Beginner
DFNC
Operational Reference  69