Setting Up The Progressive Scan; Canceling The Progressive Scan - Samsung DVD-R135 Instruction Manual

Setting up the Progressive
scan
If the TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder to
enjoy.
1 With the DVD Recorder in Stop mode,
press the P.SCAN button on the front of the
DVD Recorder.
The message "Press [Yes] to confirm Progressive
scan mode. Otherwise press [No]" will appear.
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
Yes
Press the œ √ buttons to select Yes, and
2
then press the OK button.
3 Set your TV to Progressive input (using the
TV remote control.)
When the HDMI cable is connected, this
■
screen is not displayed.
NOTE
Do not press the P.SCAN button if you
■
are using a TV that does not support
Progressive mode. Nothing will be
displayed on the screen if pressed.
Progressive setting is only available when
■
the Video Out is set to Component.
If the P.SCAN button on the DVD
■
recorder's front panel is pressed during
playback, the prohibition mark(
appears on the screen.
Progressive setting is only available when
■
the DVD recorder is in stop mode.
No
)
Canceling the Progressive
scan
1 With the DVD Recorder in Stop mode,
press the P.SCAN button on the front of the
DVD Recorder.
The message "Press [Yes] to confirm Interlace scan
mode. Otherwise press [No]" will appear.
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes No
Press the œ √ buttons to select Yes, and
2
then press the OK button.
Set your TV to Interlace input (using the TV
3
remote control.)
If you press the P.SCAN button by
■
mistake when your TV does not support
NOTE
Progressive mode, you need to release
the Progressive mode. To release the
Progressive mode, press the P.SCAN
button on the front panel 2 times.
The screen will recover after the PS
LED on the front panel display turns off.
35
English -