Checking The Headlight Setting - KTM 2013 1190 Adventure R Owner's Manual

16 ELECTRICAL SYSTEM
16.11

Checking the headlight setting

–
Install the mask spoiler.
–
Install the tank cover. (
–
Install the front side cover. (
–
Mount the seat. (
–
Check the headlight setting. (
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
Distance
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
400726-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any baggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
x ( p. 113)
p. 118)
p. 109)
p. 97)
p. 161)
under the first mark.
B
B
A
5 cm (2 in)
from the wall and switch
A
5 m (16 ft)
p. 162)
161