Mtc/Abs; Drive Mode - KTM 2013 1190 Adventure R Owner's Manual

7 COMBINATION INSTRUMENT
7.9.10

"MTC/ABS"

7.9.11

"Drive Mode"

Condition
• The vehicle is stationary.
–
Press the UP or DOWN button until the "MTC/ABS" menu appears on the matrix display.
In the "MTC/ABS" menu, "MTC" and "ABS" can be switched off.
In "ABS mode", a choice can be made between "Road" and "Offroad".
Info
After the ignition is switched on, traction control and ABS are enabled again.
When the "Offroad" ABS mode is enabled, ABS only controls the front wheel. The
rear wheel is not controlled by ABS and may block during braking maneuvers.
401837-01
When the "Road" ABS mode is enabled, the brakes are also applied to the rear wheel
when the front brake is activated. ABS can intervene on both wheels.
–
Press the UP or DOWN button until the "Drive Mode" menu appears on the matrix display.
Pressing the SET button opens the menu.
–
Use the UP or DOWN button to navigate through the menu. The SET button can be used
to select engine and traction control settings that are coordinated with each other.
SPORT – homologated performance with very direct response; the traction control
allows greater slip on the rear wheel
STREET – homologated performance with very direct response; the traction control
allows normal slip on the rear wheel
RAIN – reduced homologated performance for better ridability; the traction control
401829-01
allows normal slip on the rear wheel
OFFROAD – reduced homologated performance for better ridability; the traction
control allows high slip on the rear wheel
49