KTM 2013 1190 Adventure R Owner's Manual page 103

13 SERVICE WORK ON THE CHASSIS
Main work
–
Loosen nut
–
Loosen nuts
–
Adjust the chain tension by turning the adjusting screws
Guideline
Chain tension
Turn adjusting screws
right chain adjusters
The rear wheel is then correctly aligned.
Info
The upper part of the chain must be taut.
Chain wear is not always even, so you should check the setting at different chain
positions.
–
Tighten nuts
–
Make sure that chain adjusters
–
Tighten nut
Guideline
S00242-10
Nut, rear wheel spindle
Info
Chain adjusters
.
1
.
2
on the left and right so that the markings on the left and
3
are in the same position in relation to reference marks
4
.
2
are resting against adjusting screws
4
.
1
M25x1.5
can be turned through 180°.
4
on the left and right.
3
40... 45 mm (1.57... 1.77 in)
3
90 Nm Thread greased
(66.4 lbf ft)
101
.
C
.