13
BRAKE SYSTEM
13.7
Checking the free travel of foot brake lever
Warning
Danger of accidents Brake system failure.
–
If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust the free travel on foot brake lever according to specifications.
(Duke)
–
Disconnect spring
–
Move the foot brake lever back and forth between the end stop and the contact to
the foot brake cylinder piston and check free travel
Guideline
Free travel at foot brake lever
»
If the free travel does not equal the specification:
–
V00060-10
–
Attach spring
(Duke R)
–
Disconnect spring
–
Move the foot brake lever back and forth between the end stop and the contact to
the foot brake cylinder piston and check free travel
Guideline
Free travel at foot brake lever
»
If the free travel does not equal the specification:
–
K00443-10
–
Attach spring
.
Adjust the basic position of the foot brake lever.
.
.
Adjust the basic position of the foot brake lever.
.
.
3... 5 mm (0.12... 0.2 in)
(
p. 107)
.
3... 5 mm (0.12... 0.2 in)
(
p. 107)
106