KTM 2016 690 DUKE R Owner's Manual page 92

12 SERVICE WORK ON THE CHASSIS
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Shift gear to neutral.
–
Push the chain upwards near the vertical rib of the swingarm and measure the chain
tension 
Info
The upper chain section
Chain wear is not always even. Repeat this measurement at different chain posi-
tions.
Chain tension
» If the chain tension does not meet the specification:
–
Adjust the chain tension. (
K00351-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
.

must be taut.
p. 91)
p. 83)
5 mm (0.2 in)
p. 83)
90