KTM 690Duke EU Owner's Manual page 56

SERVICE SCHEDULE
Check the steering head bearing play.
Change the spark plug.
Check the valve clearance.
x
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and bellows for cracking, leaks, and
correct routing.
x
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the throttle cables are undamaged, routed without sharp bends and set correctly.
Change the air filter. Clean the air filter box.
Check/rectify the fluid level of the hydraulic clutch. (
Check the screws and nuts for tightness.
Change the coolant. x
Change the front brake fluid.
Change the rear brake fluid.
Check the clutch.
x
Check the headlight setting.
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in KTM DEALER.NET and in the service record.
K10N: Once after 1,000 km (621.4 mi)
K75A: Every 7,500 km (4,660 mi) or annually
K150A: Every 15,000 km (9,321 mi) or every 2 years
K300A: Every 30,000 km (18,641 mi) or every 4 years
p. 119)
x
p. 127)
x
x
x
x
x
x
x
K10N K75A K150A K300A
• • •
•
• •
•
• • •
• •
• • •
• •
• •
• • •
•
•
•
• • •
• • •
• • •
• • •
• • •
54
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•