KTM 690Duke EU Owner's Manual page 103

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Remove the faulty fuse.
Guideline
Fuse 1 - 10A - ignition, combination instrument, alarm system (optional)
Fuse 2 - 10A - clock, ignition (EFI control unit)
Fuse 3 - 10A - throttle valve control unit
Fuse 4 - 10A - fuel pump
Fuse 5 - 10A - radiator fan
Fuse 6 - 10A - horn, brake light, turn signal, alarm system (optional)
Fuse 7 - 15A - high beam, low beam, parking light, tail light, license plate lamp
Fuse 8 - 10A - for accessories (accessories connected with ignition switch)
Fuse 9 - 10A - for accessories (permanent positive)
Fuse 10 - not used
Fuse SPARE - 10A/15A - spare fuses
Info
A defective fuse can be identified by the burned-out fuse wire
100154-10
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) (
Fuse (75011088015) (
p. 157)
p. 157)
101
.
