KTM 690Duke EU Owner's Manual page 141

Hide thumbs Also See for 690Duke EU:
Table of Contents

Advertisement

TROUBLESHOOTING
Faults
Engine overheats.
FI warning lamp (MIL) lights/flashes
Engine dies during the journey
High oil consumption
Headlight and parking light not func-
tioning
Turn signal, brake light and horn not
functioning
Possible cause
Radiator fins very dirty
Foam formation in cooling system
Buckled or damaged radiator hose
Thermostat is faulty
Fuse 5 blown
Defect in radiator fan system
Air in cooling system
Defect in fuel injection system
Lack of fuel
Fuse 1, 2 or 4 blown
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscosity)
Fuse 7 blown
Fuse 6 blown
Action
Clean radiator fins.
Drain the coolant.
(
x
Fill/bleed the cooling system.
Change the radiator hose.
Check the thermostat.
x
Change the fuses of individual power consumers.
(
p. 100)
Check the radiator fan system.
Fill/bleed the cooling system.
Read out the fault memory using the KTM diag-
nostics tool.
x
Refuel. (
p. 50)
Change the fuses of individual power consumers.
(
p. 100)
Route the vent hose without bends or change it if
necessary.
Check the engine oil level. (
Change the engine oil and filter, clean the oil
screens.
x
(
p. 130)
Change the fuses of individual power consumers.
(
p. 100)
Change the fuses of individual power consumers.
(
p. 100)
139
p. 123)
x
(
p. 124)
x
x
x
(
p. 124)
p. 129)

Advertisement

Table of Contents
loading

This manual is also suitable for:

690duke aus/uk690duke jp

Table of Contents