MAINTENANCE WORK ON CHASSIS AND ENGINE
Condition
Fuel tank is reset or removed.
–
Remove radiator cap
700182-10
–
Remove bleeder screw
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten the bleeder screw immediately.
Alternative 1
Coolant (
Alternative 2
Coolant (mixed ready to use) (
700183-01
–
Fill the radiator completely with coolant. Mount the radiator cap.
–
Rest the vehicle on the sidestand.
Fuel tank is reset.
–
Move the fuel tank forward.
The fuel tank is removed.
–
Connect and position the fuel tank.
.
.
p. 168)
p. 168)
125