Connecting The Surftab To The Internet; Connecting To A Stationary Wireless Network (Wifi) - TrekStor SurfTab wintron 7.0 Operating Instructions Manual

10) Connecting the SurfTab to the Internet

Connecting to a stationary wireless network (WiFi)

a) Call up Settings (see Section 9).
b) In Settings, tap "n
c) In the next screen, tap "w
d) Drag the WiFi slider from "o
wireless networks nearby and then displays them as a list.
e) Tap the network that you wish to connect to.
If you do not want the SurfTab to automatically connect to the selected
i
network if available, remove the tick next to "C
f ) Next tap "C
onneCt
Depending on the configuration of your router, you will be prompted to
authenticate yourself to the network. Generally speaking, a wireless network is
secured through a WPA network key or a WPS authentication method.
WPA
Enter the network key in the input field and click "n
key can generally be found on the back of your router.
WPS
If a WPS authentication method (for example, a PIN) was set up for your router,
the SurfTab shows a different input field. Enter the PIN in the input field (or follow
the selected authentication method).
The SurfTab now connects to the wireless network.
r
WARNING
You may be asked whether the SurfTab should search for additional devices
in the selected network and whether it should automatically connect to
these devices (for example, printers or television sets). This is recommended
in private home networks that you can trust. If you connect to a public
wireless network, we recommend that you decline this option by
clicking "n
You can now surf the Internet as usual using the Internet browser.
EN
16
& i ".
etzwork nternet
-F " on the left.
i i
" to "o
FF
". The SurfTab now connects to the network selected.
". In this way, you protect your private sphere.
o
". The SurfTab searches for all available
n
onneCT auTomaTiCally
" to confirm. The network
ext
".