Setting The Portion Sizes - Miele CVA 4060 Operating And Installation Instructions

Setting the portion sizes

Downloaded from CoffeeMachineManual.com Manuals
52
The flavour of the coffee produced depends on the type of
coffee, the amount of coffee used, how finely the beans are
ground and particularly, the quantity of water used. Not all
cups are the same size. To ensure the machine uses the right
amount of water to suit your taste and your cups, you can
programme in the amount to be used.
Espresso a quantity of water of between approx. 30 up to
125 ml can be set,
Coffee a quantity of water of between approx. 30 up to
250 ml can be set,
Hot water a quantity of between approx. 30 up to 250 ml
can be set,
Cappuccino - cappuccino uses (milk) froth and espresso.
The time for frothing milk can be individually controlled. The
quantity of water for espresso can be set between approx. 30
up to 125 ml.
^ Place the cup you want to use under the coffee spouts
(with cappuccino sized cups, place the cup underneath
the Cappuccinatore spout first of all).
^ Turn the right hand control until the type of drink for which
you want to set the water quantity is highlighted.
^ Press the right hand control and keep it pressed in until
"Programme the amount" appears in the under the type of
drink in the display.
^ Then release the right hand control.
^ When you have sufficient hot water in the cup press the
right hand control again.
When the Cappuccino amount prompt appears, place
the cup under the coffee spouts and hold the right hand
control pressed in until "Programme amount" appears.
The portion size for the type of drink is now set and stored in
memory. The quantity of water which you have set for the
particular type of drink will now be dispensed every time this
drink is prepared.