Programming The Amount: Setting The Portion Sizes; Via The Ok Sensor - Miele CVA 5060 Operating Instructions Manual

Programming the amount: setting the portion sizes

Programming the amount of espresso, coffee, hot milk and milk
froth via the OK sensor
50
The flavour of the coffee produced depends on the type of
coffee, how finely the beans are ground and the quantity of
water used. Not all espresso and coffee cups are the same
size. To ensure the machine uses the right amount of water to
suit your taste and your cups, you can programme the
amount to use.
With Milky drinks the proportions of espresso, milk and milk
froth are important for the taste. These proportions can be set
for cappuccino and latte macchiato.
You can programme the amount in two ways, either by
touching the OK sensor continually or via the "Settings"
option.
^ Place the appropriate cup for the drink you want to
programme under the spouts.
^ Select the type of drink.
^ Hold the OK sensor until "Prog. the amount" appears in the
display.
^ When sufficient liquid has flowed into the cup touch the OK
sensor again. "Save" will then appear in the display.
The volumes of water or milk programmed will now be
dispensed every time that particular drink is selected.
Water flow stops automatically when the maximum amount
possible is reached. The maximum amount possible for
that type of drink will be saved.
If there is insufficient water or milk in the container or flask,
the process will be stopped and the amount will not be
saved.