Setting The Portion Sizes; Setting The Portion Size When Making A Drink - Miele CM 5200 Operating Instructions Manual

Setting the portion sizes

You can programme the amount of
water used for each portion of
espresso, coffee or hot water to suit
your taste and your cups.
With milky drinks you can set the
duration of the steam used for heating
or frothing the milk. You can also
programme the amount of hot milk and
froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum amount possible for that
type of drink will then be saved.
There are two opportunities to
programme the portion amount; either:
– when preparing a drink, or
– if you call up the PROGRAMME THE
AMOUNT in the SETTINGS menu.
If there is insufficient water in the
water container, the process will be
stopped and the amount will not be
saved.
TIP You can cancel programming the
amount as long as CANCEL is visible in
the display.
34
Setting the portion size when
making a drink
Press the ., /, H or k button for at least
3 seconds to programme the amount
for that particular drink .
For caffè latte, milk froth, hot milk and
hot water you can start portion size
programming by pressing the OK
button for at least 3 seconds after
selecting the drink.
Setting portion size for espresso and
coffee
^ Place the desired cup under the
central spout.
^ Press the . or / button until
PROGRAMME THE AMOUNT
appears in the display.
The desired drink will be prepared and
SAVE will appear in the display.
^ Press the OK button when the cup
has been filled to the level you want.
The portion size programmed in will
now be dispensed every time that
particular drink is selected.