Operation - Hilti TE 2-A22 Original Operating Instructions

Noise emission values determined in accordance with EN 60745
Sound (power) level (L
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration (vector sum of three directions), measured in accordance with EN 60745
Hammer drilling in concrete (a
Drilling in metal (a )
h, D
Uncertainty (K)
4.3 Lithium­ion batteries
Battery
Rated voltage
Capacity
Weight
Rated voltage
Capacity
Weight
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com

5 Operation

Charging the battery
Note
Make sure that the outer surfaces of the battery are clean and dry before inserting the
battery in the approved battery charger.
Read the operating instructions for the charger for further information about the charging
process.
Inserting the battery
WARNING
Risk of injury Inadvertent starting of the rotary hammer.
▶ Before fitting the battery, check that the rotary hammer is switched off and that the
forward / reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Electrical hazard Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts
in the rotary hammer are free from foreign objects.
WARNING
Risk of injury Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check that the
battery is securely seated in the rotary hammer.
Removing the battery
6
)
WA
)
WA
)
pA
pA
)
h, HD
B 22/1.6 Li­Ion
21.6 V
1.6 Ah
0.48 kg
B 22/5.2 Li-Ion (01)
21.6 V
5.2 Ah
0.78 kg
)
B 22/2.6 Li­Ion (02)
21.6 V
2.6 Ah
0.48 kg
103 dB(A)
3 dB(A)
92 dB(A)
3 dB(A)
15 m/s²
2.5 m/s²
1.5 m/s²
B 22/3.3 Li-Ion
21.6 V
3.3 Ah
0.78 kg
2
3