Rack Bezel; Air Baffle - HP ProLiant DL360p Gen8 Maintenance And Service Manual

Rack bezel

Remove the component as indicated.
To replace the component, reverse the removal procedure.

Air baffle

To remove the component:
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 26).
3.
Remove the access panel
4.
Remove the SATA cable if it is clipped to the air baffle.
5.
Remove the air baffle.
6.
("Access panel" on page 27).
Removal and replacement procedures 45