Hot-Plug Drive Led Definitions - HP ProLiant DL360p Gen8 Maintenance And Service Manual

•
10 SFF configuration
IMPORTANT: A cache module is required for a 10 SFF drive cage. Drives installed in a 10
SFF configuration do not function without a cache module.
For more information, see the server user guide.

Hot-plug drive LED definitions

Item LED
Locate
1
Activity ring
2
Do not remove
3
Drive status
4
Status Definition
Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an
update.
Rotating green Drive activity
Off No drive activity
Solid white Do not remove the drive. Removing the drive causes one or
more of the logical drives to fail.
Removing the drive does not cause a logical drive to fail.
Off
Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing The drive is a member of one or more logical drives and predicts
amber/green the drive will fail.
The drive is not configured and predicts the drive will fail.
Flashing amber
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Component identification 83