Table of Contents
Advertisement
6
DSC OPERATION
■ Transmitting DSC Calls (Continued)
D Transmitting a Group Call
The Group Call function allows you to transmit a DSC signal
to only a specific group.
q Enter "Group Call" in the DSC menu.
DSC Menu
(Push [MENU])
w Rotate [SELECTOR] to select the desired preset group
address or "Manual Input," then push [ENT].
• The ID code for the Group Call can be set first. (p. 17)
• When "Manual Input" is selected, set the 8 digit ID code
for the group you wish to call using keypad keys.
5GNGEV #FFTGUU
/CPWCN +PRWV
+EQO
)TQWR #
%.4 'ZKV '06 1-
e Rotate [SELECTOR] to select a desired intership channel
or "Manual Input," then push [ENT].
• Intership channels are already preset into the transceiver in
recommended order.
The first one digit is specified '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
26
➪
Group Call
(Rotate [SELECTOR], then push [ENT].)
&5% /GPW
&5% /GPW
5GNGEV +PVGTUJKR %*
%.4 'ZKV '06 1-
&5% /GPW
)TQWR %CNN 4GCF[
%.4 'ZKV '06 1-
r Push [ENT] to transmit the Group Call.
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
t After the Group Call has been transmitted, the following
message is displayed.
)TQWR %CNN
6: %QORNGVG
%.4 'ZKV
y Push [CLR] to exit and the transceiver automatically
selects the intership channel specified in step e.
• Even if [CLR] has not been pushed, the transceiver
automatically
selects the specified intership channel in step
e after 2 seconds of inactivity.
Advertisement
Table of Contents
