D Transmitting A Group Call - Icom IC-M505 Instruction Manual

r Rotate [CHANNEL] to select "Able to Comply" or
"Unable to Comply," push [CHANNEL•ENTER].
• When "Unable to Comply" s selected, "No Reason
Gven" wll be transmtted.
--DSC Menu--
Select Action
˘Able to Comply
Unable to Comply
<CLR Exit / ENT OK>
--DSC Menu--
Individual ACK Ready
<CLR Exit / ENT OK>
t Push [CHANNEL•ENTER] to transmt the acknowledge-
ment call to the selected staton.
y After the ndvdual acknowledgement call has been
transmtted, the specfed channel (specfed by the call-
ng staton) s selected automatcally when "Able to
Comply" s selected, or returns to the prevous condton
(before enterng the DSC menu) when "Unable to
Comply" s selected n step r.

D Transmitting a group call

The group call functon allows you to transmt a DSC sgnal
to a specfic group only.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Group Call," push
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Input
Individual Call
˘Group Call
All Ships Call
Position Request
Position Report
e Rotate [CHANNEL] to select the desred pre-pro-
grammed group address or "Manual Input," push
[CHANNEL•ENTER].
• The ID code for the group call can be set n advance. (p. 19)
• When "Manual Input" s selected, set the 8-dgt ID code
for the group you wsh to call by rotatng [CHANNEL].
--DSC Menu--
Select Address
Manual Input
˘Icom
Coast station
<CLR Exit / ENT OK>
6
DSC OPERATION
6
29