Table of Contents
Advertisement
InsTallaTIon
SECTIONS
Table of Contents
Important: By default the USB Switch is loaded with a configuration
to allow only USB authentication devices. All other USB devices will
be blocked on all ports.
administrator setup
Af ter installing the Secure USB Switch, use the USB Device
Configuration Utility (UCU) to set USB device policies.
Belkin
®
Advanced Secure USB Switch User Manual
1
2
3
defining the usb device Policies
The USB device policies are configured using the USB Device
Configuration Utility, which lists allowed and blocked devices.
Allowed devices are listed in the white list, and blocked devices are
listed in the black list.
note: Devices on the black list will always supersede devices on the
white list.
Specific devices can be assigned to certain computers but not to
others.
Device policy rules can be created based on:
Once configured, the policy is loaded onto the Belkin Advanced Secure
USB Switch.
You can save a USB device policy on one Secure USB Switch and load
it on another.
note: For examples on how to configure the Secure USB Switch,
please refer to Appendix A on page 22
13
4
5
• Class
• Sub-class
• Protocol
• VID, PID
• Serial Number
6
7
baCK To Table of ConTenTs >
Advertisement
Table of Contents
