Installation - Belkin F1DN104S User Manual

Advanced secure usb switch
Table of Contents

Advertisement

InsTallaTIon

SECTIONS
Table of Contents
before Installation
unpacking the Product
Before opening the Belkin Advanced Secure USB Switch packaging,
inspect the packaging seal condition to assure that product was not
accessed or tampered with during delivery. If the packaging seal looks
suspicious, contact Belkin Technical Support and do not use the product.
After removing the packaging seal, please inspect packaging contents
to verify that required components included match the list in the
Package Contents section of this manual.
After the Belkin Advanced Secure USB Switch is removed from its
packaging materials, inspect the tampering-evident label to assure that
product is properly sealed. If the label is damaged or missing, contact
Belkin Tech Support and do not use the product.
Warning: Avoid placing cables near fluorescent lights, air-
conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Consider the following when deciding where to place the Switch:
The location of your computers in relation to your console.
The length of the cables used to connect the computers to the Switch.
Belkin
®
Advanced Secure USB Switch User Manual
1
2
3
Connecting the secure usb switch
step 1 – Connecting the Computers
Connect up to four computers to the Secure USB Switch using the
following steps:
Connect each computer with a USB cable (Belkin F3U133 series cable,
sold separately). For additional details on cables see page 6. The USB
cable can be connected to any free USB port on the computer.
note: If the number of computers used is less than the number of USB
channels (4) connect the computers in proper order 1, 2 and then 3.
The USB cable must be connected directly to a free USB port on the
computer, with no USB hubs or other devices in between.
step 2 – Power up
1. Power up the Secure USB Switch by connecting the DC power plug.
2. Power up the connected computers.
If you encounter an error, check your cable connections for that
computer and reboot. If the problem persists, please refer to the
Troubleshooting section on page 23.
12
4
5
6
7
baCK To Table of ConTenTs >

Advertisement

Table of Contents
loading

Table of Contents