Modem
Siemens
Building Technologies
The following information can be applied to troubleshooting modem, SIM card, and
network as needed. It shows current states and settings.
Path: Home > 0.5 OZS164... > Device information > Modem
Data point
Explanation, example
State modem
State modem: Shows the current modem status.
• In service: Is the standard status after a GSM
network is identified.
• Emergency only: Connected to GSM network without
authorization (excepting emergency calls).
• Out of service: Shows that no GSM network was
found where the SIM card is valid.
• Power off: Temporary status following power failure
until sufficient power is again supplied.
Signal strength
Radio signal strength of modem in percent:
0...20:
21...40:
41...60:
61...80:
8 1...100: Excellent
Modem module
S hows the modem module designation.
Software version S hows the software version of the modem module.
IMEI
Shows IMEI (International Mobile Station Equipment
I
dentity) for the modem.
State SIM card
State SIM card shows the SIM card status.
• No SIM card found inserted.
• Network PIN required: Network registration in
progress, waiting for network reply.
• User PIN required: Network registration in progress,
waiting for user PIN entry.
• User PUK required: Status after 3 wrong PIN entries.
Procedure: Remove SIM card from web server, insert
in mobile phone and enter PUK (personal unblocking
key). Reinsert SIM card in web server and continue
with correct PIN.
• Ready: Normal status after successful network login.
Phone number
The setting value corresponds to the phone number
provider
assigned by the external telephone provider (e.g.
S
wisscom) to send messages.
Web server
Operate using a web browser
Weak: Reposition web server or install
antenna extension (recommended).
Low
Good
Very good
55 / 108
CE1C5711en
25.08.2010