Siemens OZS164 SERIES WEB SERVER Commissioning Instructions page 26

E-mail
Notes
26 / 108
Siemens
Building Technologies
Path: Home > 0.5 OZS164... > Settings > Communication > E-mail
• Enter these settings if the web server is to send an e-mail for a fault.
• Additional information on e-mail settings is available in Section 5.2.
Data point
A ddress mail server
Default val.:
smtp.example.com
Setting val:
Max. 46 characters
P ort number mail server
Default val.: 25
Setting val: 1...65535
E -mail address sender
Default val.:
ozs164@example.com
Setting val:
Max. 46 characters
Authentification mail
s erver
Default val.: No
Setting val: No/Yes
U ser name
Default val.: (Blank)
Setting val: Max. 46
characters
P assword
Default val.: (Blank)
Setting val: Max. 46
characters
S ignature line 1..10
Default val.: (Blank)
Setting val: Max. 46
characters
Web server
Commissioning
Explanation, example
The provider supplies the IP address or mail
server domain name. Often referred to as the
outgoing mail server or SMTP server instead of
m ail server.
Port number 25 is default for the mail server
( and does not normally require change).
The setting corresponds to the e-mail address
of the web server.
The e-mail address is displayed in the "From"
f ield of each e-mail.
Select Yes for mail server access with
authentication.
In this case, user name and password (data
p oints below) are required.
User name and password help authenticate
e ach e-mail via the mail server.
Password and user name help authenticate
e ach e-mail via the mail server.
Signatures are transmitted with the e-mail.
They identify the sender, e.g. the plant's
I nternet address.
—
—
—
—
—
—
—
CE1C5711en
25.08.2010