Olympus DS-660 Instructions Manual page 32

Assigning Folder Names (FolderName)
Recorder buttons that are used to input characters
Button
REC/SET Press once
Press and hold
FF/+ Press once
Press and hold
REW/– Press once
Press and hold
NEW ----------
ERASE ----------
INDEX Press once
Press and hold
DISPLAY Press once
Press and hold
Use the two following methods to quickly find characters.
1 When the INDEX button is pressed, the displayed character group (example: Uppercase,
lowercase, template, symbols) will change, and you can then press the FF/+ or REW/– buttons
to select characters.
2 Every time the DISPLAY button is pressed, it will skip ahead by five characters, so you can
quickly move closer to the character you want.
(Currently displayed character) = (Space) = DICT. = TO DO = A = F = K = P = U = Z = a = f =
k = p = u = z = 1 = 6 = , = ( = } = $ = ^ = (Space) = DICT. = TO DO...
If you press the DISPLAY button while a character other than one of the above appears, you will skip to
the closest forward character in the above cycle.
Pressing the DISPLAY button again will then cycle through every fifth character as shown above.
example:
If you press the DISPLAY button while "MEMO" is displayed, "TO DO" will appear.
If you press the DISPLAY button while "B" is displayed, "F" will appear.
32
Push
To input the selected character and advance the input position.
Confirms folder name or file comment.
Forward to next character in the character list.
Scroll forward through the character list.
Backward to previous character in the character list.
Scroll backward through the character list.
Returns to previous character.
To delete the flashing character.
Switches between character groups (type).
Quickly cycles through the character groups (types).
Selects character to be input: skips ahead by 5 characters.
Quickly skips ahead in increments of five characters.
Action