Tool Specification; Part List; Intended Use - IVT JS-400SG User Manual

Tool specification

Model
Voltage/Frequency [V~Hz]
Rated power [W]
Stroke rate at no load [SPM]
Cutting ability [mm]
Pendulum action
Sound pressure level [dB(A)]
Sound power level [dB(A)]
K
Weight [Kg]
Safety class

Part list

1. Thumbwheel for stroke rate selection
2. On/Off switch
3. Lock-on button
4. Front guard
5. Saw blade
6. Guide Roller
7. Lever for pendulum stroke adjustment
8. Base plate
9. Ventilation slots
10. Hex key
11. Locking screw for parallel/circle guide
12. Parallel guide
13. Locking lever
14. Lifting rod
15. Laser guide button

Intended use

This model of Jig saw is intended for the sawing of wood, plastic
and aluminum materials.
Thanks to the wide range of accessories and saw blades available
as optional extra, this machine can be used for many applications
and it enables also to obtain curved or circular cuts.
Safety regulation for the use
General safety rules
The following listed safety instructions should serve you for the
right use of the tool and for the protection of your own safety,
therefore, please read this very carefully.
When passing this tool to a third person, these instructions must
be handed too.
Retain this user manual and all other literature supplied with
JS-400SG
230~50
400
3000
in wood
55
in aluminum 6
-
84
97
3
1.80
II
13
JS-570SGP JS-750SGP
230~50
570
800 – 3000 0 – 3000
65
8
+
84
97
3
2.07
II
your tool for any future reference.
Comply with all the safety information and the warnings on the
tool.
Be familiar with the controls and the proper use of the tool
before attempting to use it and above all, make sure you know
how to stop to use it in case of emergency.
Following these simple instructions will also maintain your tool
in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• On the tool, there may be also decals and further indications
about the safety equipment to use that must be considered.
The prevention of accidents is dependent upon the awareness,
common sense and proper training of everyone involved in the
operation, transport, maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children should be
supervised to ensure that they do not play with the tool.
• Keep children and pets away. All onlookers should be kept
at a safe distance away from the tool when it is in use.
• The user is responsible for third parties while working with
the tool.
• People who aren't acquainted with the operating
instructions, children, juveniles who have not yet reached the
minimum age for using this tool and people under the influence
of alcohol, drugs or medication are not allowed to use the tool.
Local regulations may restrict the age of the operator.
WARNING
The consumption of alcohol, medication and drugs, plus
states of illness, fever and fatigue will affect your ability to
react. Do not use this tool in any of these situations.
• Make sure that all the protective devices (if present) are
fitted and are in good condition.
• Never operate the tool with defective safety devices or
guards (if present), or without safety devices in place.
Instruction manual
JS-800SGP
230~50 230~50
750 800
800 – 3000
100 100
10 15
+ +
89.8 88
100.8 99
3 3
2.65 3.08
II II
EN