Wireless Security Setting - Huawei Aolynk VDR824 User Manual

User Manual
Aolynk VDR824 ADSL2+ VoIP Broadband Router/
Aolynk VDR824g ADSL2+ VoIP Wireless Broadband Router
Table 4 -7 Description of the wireless basic setting items
Item
Wireless
Network
Mode
SSID
Wireless
Channel
Wireless
SSID
Broadcast

4.5.2 Wireless Security Setting

T his page allows yo to set the wireless data encryption to ensure the
Figure 4-29 Wireless security setting
Three encryption options are available from the [Security Mode] drop-down list: WEP,
WPA-PSK, and WPA. Select any option to display the corresponding configuration
items. To disable the encryption, select the Disabled option. The following introduces
their configurations respectively.
Select the wireless network mode from the drop-down list. If both
802.11g-based and 802.11b-based devices are available in your
network, keep the default Mixed option
802.11g-based device is available in your n
option; if only the 802.11b-based device is available in your network,
select the B-Only option. To disable the wireless network, select the
Disable option.
Service set identifier, the unique identifier shared by the VDR824g
and other clients in the same wireless network. The SSID of all the
nodes must be the same and cannot exceed 32 characters.
Select the appropriate wireless channel from the drop-down list. The
channel beyond the control range can be accepted. Ensure that the
nodes in the same wireless LAN use the same channel, or
automatically select the channel when clients are connected to the
access point.
The wireless client detects the VDR824g SSID when searching for
the local accessible wireless network. To make the VDR824
broadcast the SSID, select the Enable option, otherwise, select the
Disable o ption.
u
37
4 Web-based Basic Configuration
Description
unchanged; if only the
etwork, select the G-Only
g
security.