High Altitude Installations; Non-Combustible Materials Specification; Combustible Materials Specification; Electrical Codes - Heat & Glo MEZZO-1000-AU Installation Manual

D. High Altitude Installations
NOTICE: If the heating value of the gas has been
reduced, these rules do not apply. Check with your local
gas utility or authorities having jurisdiction.
When installing above 2000 ft. (610 m) elevation:
Reduce input rate 4% for each 1000 ft. (305 m) above
2000 ft. (610 m).
E. Non-Combustible Materials Specification
Material which will not ignite and burn. Such materials are
those consisting entirely of steel, iron, brick, tile, concrete,
slate, glass or plasters, or any combination thereof.
Materials that are reported as passing
Standard Test Method for Behavior of Materials in a
Vertical Tube Furnace at 750 ºC (1382
shall be considered non-combustible materials.
F. Combustible Materials Specification
Materials made of or surfaced with wood, compressed pa -
per, plant fibers, plastics, or other material that can ignite
and burn, whether flame proofed or not, or plastered or
unplastered shall be considered combustible materials.
G. Electrical Codes
All electrical safety testing has been done following
the EN 60335-2-102 standard. Local codes apply.
Heat & Glo • MEZZO-1000-AU, MEZZO-1300-AU, MEZZO-1300ST-AU, MEZZO-1600-AU Installation Manual • 2304-970 Rev. D • 3/15
ASTM E 136,
° and
F) UL763
5