Mercedes-Benz 2016 GL Operator's Manual page 73

Table of Contents

Advertisement

Thus, the distance warning function cannot
provide a warning in all critical situations.
There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and be ready to brake.
G
WARNING
The distance warning function cannot always
clearly identify objects and complex traffic
situations.
In such cases, the distance warning function
may:
give an unnecessary warning
R
not give a warning
R
There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and do not rely solely on the distance
warning function.
Function
To activate/deactivate: activate or deac-
X
tivate the distance warning function in the
on-board computer (
If the distance warning function is not activa-
ted, the æ symbol appears in the assis-
tance graphics display.
The distance warning function can help you to
minimize the risk of a front-end collision with
a vehicle ahead or reduce the effects of such
a collision. If the distance warning function
detects that there is a risk of a collision, you
will be warned visually and acoustically. The
distance warning function cannot prevent a
collision without your intervention.
Starting at a speed of around 4 mph (7 km/h),
the distance warning function warns you if
you rapidly approach a vehicle in front. An
intermittent warning tone will then sound,
and the · distance warning lamp will light
up in the instrument cluster.
page 281).
Y
Driving safety systems
Brake immediately in order to increase the
X
distance from the vehicle in front.
or
Take evasive action, provided it is safe to do
X
so.
Due to the nature of the system, particularly
complicated but non-critical driving condi-
tions may also cause the system to display a
warning.
With the help of the radar sensor system, the
distance warning function can detect obsta-
cles that are in the path of your vehicle for an
extended period of time.
Up to a speed of around 40 mph (70 km/h),
the distance warning function can also react
to stationary obstacles, such as stopped or
parked vehicles.
If you approach an obstacle and the distance
warning function detects a risk of a collision,
the system will initially alert you both visually
and acoustically.
In particular, the detection of obstacles can
be impaired if:
there is dirt on the sensors or anything else
R
covering the sensors
there is snow or heavy rain
R
there is interference by other radar sources
R
there are strong radar reflections, for
R
example in parking garages
a narrow vehicle traveling in front, e.g. a
R
motorbike
a vehicle traveling in front on a different line
R
new vehicles or after the COLLISION PRE-
R
VENTION ASSIST system has been serv-
iced
Observe the notes in the section on break-
ing-in (
page 164).
Y
Following damage to the front end of the vehi-
cle, have the configuration and operation of
the radar sensor checked at a qualified spe-
cialist workshop. This also applies to colli-
sions at low speeds where there is no visible
damage to the front of the vehicle.
71
Z

Advertisement

Table of Contents
loading

Table of Contents